F1-02 on ARF15 finisher attached to MXM550

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rayjeek
    Trusted Tech

    Site Contributor
    100+ Posts
    • Jun 2010
    • 239

    #1

    [Error Code] F1-02 on ARF15 finisher attached to MXM550

    I am having the above code on the finisher. Has anyone got this before.
    I saw a fix saying transport motor and finisher pwb needs to be repllaced at the same time. Has anyone come across this one. Thanks
  • OMD-227

    #2
    There is a modified switch slider plate to prevent this.
    Sending you the bulletin now bro.

    Although there is plenty of info on the transport motor & finisher pwb as you already know.

    Comment

    • rayjeek
      Trusted Tech

      Site Contributor
      100+ Posts
      • Jun 2010
      • 239

      #3
      Many Thanks Wazza.

      Comment

      • Dark Helmet
        Senior Tech

        Site Contributor
        500+ Posts
        • May 2009
        • 850

        #4
        We had this code and screwed around with the switch and the slide, didn't have the upgraded parts. We swapped finisher boards, the switch it's self and nothing worked. The plastic slider was clearly contacting the switch. We ended up just dismounting the switch and taping the arm down and the thing started working.

        I'd definitaly do the upgrades in the bullettin first. Our machine was 2 hours out of town and it's a nightmare to get them to pay so we just left it as is. Try our fix if you get stumped.
        Evil will always triumph because good is dumb.

        Comment

        Working...