mx-2300

[DINGO]

Hi, good night.

I have a problem with a mx 2300, that the costumer print a full image in A3 size, and if him print at four/five in continuous, and makes a pause and after more four/five prints ok.

But if the costumer prints fifteen continuous, not blowing in one side, leaving the entire toner clinging to the fuser rollers.

the heat rollers are news, and i use oem toner, dv, and drums.

I appreciate the opinions possible.

[DINGO]

sorry, inadvertently duplicated the post, and i do not know how to eliminate them

[igi]

hi dingo
try to use by-pass/manual tray and set it to thick paper
thath will show if the setting of the copier is not correct or ther is a problem
ta
igi

[DINGO]

thanks friend