L8-01 code

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fanasa
    Technician
    • Jul 2010
    • 34

    #1

    [Error Code] L8-01 code

    has anyone had a L8-01 code on an AR-M350/450?
    The tech replaced the AC/DC power supply and the PCU board according to the documentation.
  • White_Toner
    Technician

    50+ Posts
    • Aug 2009
    • 71

    #2
    What is the reason of your question? The problem stay after replacement?
    manual says:
    Cause:
    The PCU PWB connector or the power unit
    harness is disconnected or broken.
    PCU PWB trouble
    Power unit trouble

    Comment

    • Petekj7
      Technician
      • Jan 2010
      • 21

      #3
      Sharp say replace harness between motherboard and pcu

      Comment

      • White_Toner
        Technician

        50+ Posts
        • Aug 2009
        • 71

        #4
        OK! Sharp say: harness is disconnected or broken.
        In my experience of many years static harness never was broken by itself. Disconnected? May be lose contact in Jack or plug, but very seldom.

        Comment

        • fanasa
          Technician
          • Jul 2010
          • 34

          #5
          Thanks for all the replies.
          All the suggestions by the book have been followed. Even repleaced harness.
          Any other ideas?

          Comment

          • OMD-227

            #6
            Unstable power supply at the wall. PCU board receiving low or fluctuating power signal.

            Comment

            Working...