If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What is the reason of your question? The problem stay after replacement?
manual says:
Cause:
The PCU PWB connector or the power unit
harness is disconnected or broken.
PCU PWB trouble
Power unit trouble
OK! Sharp say: harness is disconnected or broken.
In my experience of many years static harness never was broken by itself. Disconnected? May be lose contact in Jack or plug, but very seldom.
Comment