AEM-550 fuser pressure

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pontiac
    Trusted Tech
    • Apr 2008
    • 420
    #1

    AEM-550 fuser pressure

    Just want to know want the fuser nip measurement should be. thanks
    Tags: 105, 1105, 211, 550, fuser, nip, pressure, sharp
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3374
      #2
      Originally posted by pontiac
      Just want to know want the fuser nip measurement should be. thanks
      As far as I know, it's not really adjustable; you either have the pressure release screws out the way out or in. I haven't tested it ,but generally the nip is about 10mm.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • wtroll
          Technician

          50+ Posts
          • May 2008
          • 85
          #3
          ZOOTECH is right!
          If you have installed a new fuser unit, just turn the 2 pressure screws c/clockwise till they are free.
          If you have a fuser unit that give you quality problem, check all cleaning rollers into.
          Remember that Sharp as modified the fusing unit and the fusing replacement kit to improve quality.

          Regards

            Comment

            Previous template Next
            Working...