Sharp MX2300

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • GeorgeBest
    Senior Tech

    500+ Posts
    • Jul 2009
    • 520
    #1

    Sharp MX2300

    Customer complains about a rattling sound at startup and when the machine has just finished copying.
    There are no paper jams and no error messages.
    Sound does not come from the heater. Looks like its coming from the exit No clue here.

    Any ideas
    Thanks in advance
    Tags: copyi, copying, customer, error, exit, heater, jams, mx2300, paper, sharp, startup
    • rayjeek
      Trusted Tech

      Site Contributor
      100+ Posts
      • Jun 2010
      • 239
      #2
      The rattling noise could be coming from fuser unit. Try changing the upper/lower heat rollers and also use sim6-02 to check operation of fans.

        Comment

        • JustManuals
          Field Supervisor

          5,000+ Posts
          • Jan 2006
          • 9838
          #3
          This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
          Just Manuals | The Internet's largest selection of manuals | Instant Downloads

          Paul@justmanuals.com

            Comment

            • bdcrandall13
              Trusted Tech

              100+ Posts
              • Sep 2010
              • 236
              #4
              The fuser rollers on this machine are notorious for developing flat spots. You don't tend to hear it as much when copying because of the other noises the machine is making, but when warming up or after a copy job it is much more noticeable. Change the rollers or the entire fuser unit.

                Comment

                Previous template Next
                Working...