MX-5001N

[yousaf]

hi
any body knows how to deal with this error i reset the error after again it come again error code is H4-01, i for get to write modle number mx-5001N sharp
any body help me
bye
knight

[JustManuals]

Re: MX-5001N

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com

Paul@justmanuals.com

[bilyahn]

Re: MX-5001N

Did you try to clean the thermistors or reset the thermocouples for the fuser? If you did this an you are still having this issue here are the steps to try.

Good luck.

Bil

Trouble contentDetail PCUCause The fusing temperature does not reach the specifiedlevel within the specified time from turning ON thepower relay.Thermistor trouble.Heater lamp trouble.PCU PWB troubleThermostat trouble.Connector, harness connection trouble.Power unit trouble.Interlock switch trouble.
Check & Remedy
Replace the thermistor.Replace the heater lamp.Replace the PCU PWB.Replace the thermostat.Check connection of the connector and the harness.Replace the power unit.Replace the interlock switch.Use SIM5-2 to check the flashing operation of theheater lamp.

Use SIM14 to cancel the trouble.

[yousaf]

Re: MX-5001N

hi
can u plz tell me how to change administrator password
thankssssssssssssssssssssssssssss
knight

[Akitu]

Re: MX-5001N

Can't tell if you're a tech working on an unfamiliar brand or an end-user...

Either way with you spamming the same question, I don't particularly feel inclined to give you the answer you seek, certainly not for free. Buy a manual and get all your answers there.

[Dark Helmet]

Re: MX-5001N

Sim 24-30 will reset the admin password back to admin

Also you can edit your posts. If you check under your original post you will see a edit button. No need to start new threads.

[Akitu]

Re: MX-5001N

Aww, had to go and give away our secret tech code huh Lawrence? Be happy you did not share the secret of our copy tech ninjitsu... Lol

[Ednicarl20]

Re: MX-5001N

H4-01, password for Admin... this is an ABC to a copier technician wonder why he is asking for this questions...

[Akitu]

Re: MX-5001N

H4-01, password for Admin... this is an ABC to a copier technician wonder why he is asking for this questions...

I believe this thread was solved/inactive earlier... Must be losing my mind!