Sharp ARM207

[Vesigoth]

Trying to connect this machine to the network (TCP/IP) I go into Key Operator Settings arrow down to "Energy Save" setting and can't get any farther than that. The next item on the menu should be "Network Settings" but it won't display this setting. Any suggestions would be appreciated. Thanks.

[mojorolla]

Re: Sharp ARM207

Are you logged in as the administrator?

[Akitu]

Re: Sharp ARM207

Are you logged in as the administrator?

I do believe on those machines it's still considered a key operator. Though you are correct. 00000 default code for key op. 22-7 to display it if it has been changed.

(Almost wrote in 24-7, big difference, whoopsies!)

[ZOOTECH]

Re: Sharp ARM207

Trying to connect this machine to the network (TCP/IP) I go into Key Operator Settings arrow down to "Energy Save" setting and can't get any farther than that. The next item on the menu should be "Network Settings" but it won't display this setting. Any suggestions would be appreciated. Thanks.

I assume you have the ARNB3 print controller and the USB cable is going to the to the top USB2 connector of the machine, right?