AR-201

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rbell12
    Technician

    50+ Posts
    • Aug 2006
    • 83
    #1

    AR-201

    Customer called in and says she has icon of a man and a gear on screen. We don't normally work on sharp and are wondering what we need inthe way of supplies to perform maintenance on this unit. Have already located developer and drum, just want to know if there is anything else recommended to take as this is some distance out of our normal service area. Any suggestions would be greatly appreciated. She didn't give a meter count, so, we are basically going out blind on this one. TIA, rb12
    Tags: area, customer, drum, maintenance, screen, service, sharp, supplies, unit, work
    • Akitu
      Legendary Frost Spec Tech

      Site Contributor
      2,500+ Posts
      • Oct 2010
      • 2595
      #2
      Re: AR-201

      AR202DR, AR202ND, UCLEZ0009QSZZ cleaning blade. Clean the charge grid as necessary.
      Cthulhu for president! Why settle for the lesser evil?

        Comment

        • rbell12
          Technician

          50+ Posts
          • Aug 2006
          • 83
          #3
          Re: AR-201

          Thank you, Akitu. Is there anything that needs to be done besides resetting drum and developer counts? Again thank you very much for the response. Happy Holidays! rb12

            Comment

            • Akitu
              Legendary Frost Spec Tech

              Site Contributor
              2,500+ Posts
              • Oct 2010
              • 2595
              #4
              Re: AR-201

              You'll need to reset the maintenance counter as well with sim 20, or the light will never go away. Quite welcome, CHLDZ0035QS51 is the part number for the whole charge unit if you need to replace.
              Cthulhu for president! Why settle for the lesser evil?

                Comment

                Previous template Next
                Working...