Every time a copy is made or printed the first third of the image reverses to the right side and it flips the page...... any suggestions?Ar-155 Scan.pdf
-
-
Re: Reverse Image when scanning or printing on AR-155
Hi i had this problem before
it was the lazer unit
good luck
-
Re: Reverse Image when scanning or printing on AR-155
igi was reason.
i fixed one this, disassembled the laser unit and cheked all the welds, i have luck.
(laser board, poligonmotor board.)Comment
-
Re: Reverse Image when scanning or printing on AR-155
Thanks i'll try those out and report back. Appreciate the fast responses!
Comment
-
Re: Reverse Image when scanning or printing on AR-155
I'll have to agree with my predecessors:
Registration on copy image is shifted 59mm to the copier front. The cropped portion of the image appears on the opposite side of the page. Defective laser assembly. Replace the laser assembly.
=^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Reverse Image when scanning or printing on AR-155
I ventilated the machine ALL OVER honeycomb vent under the sharp logo removed filter in fuser door and cut open fan vent still happening thoughComment
-
Re: Reverse Image when scanning or printing on AR-155
sorry wrong threadComment
Comment