If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi khan
i too am looking for a service manual for the above forementioned copier. Mine blinks H and 2 tring to get a solution for it.
Thanks tomasjani@hotmail.com
Saint
Khan, sorry, no manual. But the codes are universal throughout the Sharp line.
Saint, hold the start key to see the rest of the code. H2-00 is an open main thermistor (middle one), H2-01 is an open sub-thermistor (end one). In order of likelyhood check thermistors (~20M ohms @ room temp, actual value not critical), thermal switches (0 ohms), lamps (0.3 ohms). Good luck.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
Can anyone confirm for the consumables of Oliveti model: d-copia 16w and d-copia 20w. Is it possible to use the consumables of Sharp AR-5316/5320 by changing the CRUM destination code.
As Oliveti d-16w and Sharp AR-5316 are the same machine but toner cartridge cannot be used interchangable, Anyone could tell me why it is and its solution. As locally Olivetti toner cartridge not available here.
Comment