ar-m451 print job

[DINGO]

>I friends
i have some ar-m451n, and my question is because i have o big pdf document for print, and in one of them , only beguin print after the document is all 180 mb in spool, wait about 4 minuts, and i have another 3 in same place that the print job beguins imediatly?

all of them as the same model, firmware version and optinals, and of corse same print drive versio?

Somenone know something about?

best regards

[Akitu]

Re: ar-m451 print job

In your printer properties (devices and printers, right click printer, printer properties or properties, depending on windows version) under "Advanced".

There are several options, either printing directly or spooling the print job. In here you can change the options to spool the entire document first or to start printing immediately.

Hope this helps, good luck.

[DINGO]

Re: ar-m451 print job

thanks mate, but here all copiers are in the same contitions,
thanks

[DINGO]

I mean, start imediatly is chosed in all copiers.

[igi]

Re: ar-m451 print job

Hi
do you use pcl-6 latest driver?

[DINGO]

No, i m using the pcl5 drive, is more fast them pcl6.
Igi, in the same network i have four ar-m451n, all of them with same definition, firmware and so, and only one not start imediatly.
Well, i m thikyng restart thd NIC.
Regards

[andreas182]

Re: ar-m451 print job

hi friend helpme please i need sst ir5000....thanks

[igi]

Re: ar-m451 print job

Hi
restarting nic is a good start,
if does not help try swaping nic with another mfp
ps reformat the h.disc and test memmory
cheers

[igi]

Re: ar-m451 print job

hi friend helpme please i need sst ir5000....thanks

sorry friend


but i dont have 5000 infra-red stainless steel tables.

cheers

[ZOOTECH]

Re: ar-m451 print job

hi friend helpme please i need sst ir5000....thanks

WHAT???

[DINGO]

Re: ar-m451 print job

good night friends
solved, was the option "counter bytes lpr"b in the print drive, must be disable for print faster.