Prefix filename

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • bilyahn
    replied
    Re: Prefix filename

    Originally posted by markpote
    Hi and thanks for the reply.

    I have already setup the preset buttons with all the other settings I need. What is not working as I need is the naming convention.

    If I set up the preset button it will always send the file as the name specified, so will overwrite the previous scan. I need each preset button to be prefixed with a code of my choice (ABC1_, ABC2_... etc) then have a unique identifier afterwards, preferably a date/time stamp.

    I hope this makes sense?

    Mark
    If you go to the machine webpage under address book and click on the profile name I think there is an entry if you scroll down for file name prefix so you can edit it for each user that you want. Didn't get a chance to look yesterday and won't until later today to verify this.

    Good luck.

    Bil

    Leave a comment:


  • markpote
    replied
    Re: Prefix filename

    Hi and thanks for the reply.

    I have already setup the preset buttons with all the other settings I need. What is not working as I need is the naming convention.

    If I set up the preset button it will always send the file as the name specified, so will overwrite the previous scan. I need each preset button to be prefixed with a code of my choice (ABC1_, ABC2_... etc) then have a unique identifier afterwards, preferably a date/time stamp.

    I hope this makes sense?

    Mark

    Leave a comment:


  • mojorolla
    replied
    Re: Prefix filename

    Enter all the presets for the job. Right hand side of the touch panel, touch the arrow. One the the choices should be save as a favorite.


    Leave a comment:


  • markpote
    started a topic Prefix filename

    Prefix filename

Working...