AR 168D Constant Chatter

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mlbcopiers
    Technician
    • Oct 2007
    • 34
    #1

    AR 168D Constant Chatter

    John, Thanks for the help. The patch worked.

    I have a new Sharp AR 168D that I just installed. The customer is an old soul. He does not like the constant noise from the "exposure system" constantly resetting to the home position.

    I told the customer to set the preheat and sleep mode, but then he is upset about the delay before a copy can be made.

    I need to find him an old Sharp SF 155.

    Can I do anything about the machine readjusting the exposure sytem constantly. Why does it do this anyway?

    Thank you for your help.
    Mitch,
    Tags: 168d, cons, constant, exposure, ignore, off, sharp ar
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22927
      #2
      It's just homing itself. Yes it's annoying. But you've identified the two options:
      1) short auto shutoff time.
      2) just ignore it.

      It can't be disabled.

      =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...