MX2310 doc feeder drive motors

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gwaddle
    Senior Tech

    500+ Posts
    • May 2009
    • 782
    #1

    MX2310 doc feeder drive motors

    Something I ran across the other day that I hadn't seen here and thought I'd share. I had a 2310 that jammed in the DF most of the time. The first thing I checked was for a clear paper path and sensor ops. I pulled the back cover and noticed that the shock mounts on both drive motors were coming apart. I don't know if this is going to be a common problem, but there are a lot of machines both color and b/w that have the same DF. Just thought I'd mention it.
    I know I should be ashamed of myself. Strangely though, I am not.
    Tags: None
    • lky1978
      Trusted Tech

      250+ Posts
      • Mar 2009
      • 482
      #2
      try to check/reseat the connector between feeder and machine. i faced same problem, losed connection when packed from factory.

        Comment

        • bilyahn
          Service Manager

          1,000+ Posts
          • Dec 2006
          • 1470
          #3
          Re: MX2310 doc feeder drive motors

          Thanks for the heads up! Haven't seen this yet but only have a couple of these units. DF is used across multiple generations I think so definitely something to be aware of.

          Thanks again.

          Bil

            Comment

            Previous template Next
            Working...