sharp mx-b401 error code e7-

[Guest]

hello this is my first post.
there is a sharp mx-b401 that is throwing an error code e7-01
I have looked high and low on the web for an error code listing and so far have gotten nowhere. I take it these arent redily published.
any insight would be greatly appreciated.
thank you.

[JustManuals]

Re: sharp mx-b401 error code e7-

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[brokey]

Re: sharp mx-b401 error code e7-

Cause Image data transfer error in the MFP PWB.
MFP PWB trouble.
Check & Remedy Check connection of the connector and the harness
of the MFP PWB.
Replace the MFP PWB.
Error cancel method Power OFF - ON

[Kenneth D]

Re: sharp mx-b401 error code e7-

Thank you I have tried to power down several time to clear the code to no avail. where exactly is the MFP PWB?

Cause Image data transfer error in the MFP PWB.
MFP PWB trouble.
Check & Remedy Check connection of the connector and the harness
of the MFP PWB.
Replace the MFP PWB.
Error cancel method Power OFF - ON

[ZOOTECH]

Re: sharp mx-b401 error code e7-

Thank you I have tried to power down several time to clear the code to no avail. where exactly is the MFP PWB?

Call a Sharp tech, he'll take care of it for you.

[Akitu]

Re: sharp mx-b401 error code e7-

E7-01 is an image data error. Your post screams that you're an end user, so your options fall to purchasing a manual from Paul for an explanation, or a simple power cycle of your machine to clear your code.

You're welcome to do either one. If your errors persist after a power cycle, contact your local service technician.

[harleyrider]

Re: sharp mx-b401 error code e7-

Purchase and rtfm.

[Kenneth D]

Re: sharp mx-b401 error code e7-

Thanks everyone I was hoping it was somethng I could clear, reach a plug to reseat or something that i could do to get it to fire up.
I will leave the leatherman in my pocket.

[mojorolla]

Re: sharp mx-b401 error code e7-

Leave the Leatherman at home and call a pro.