how do I get into simulation mode??
-
-
Re: how to get into simulation mode?
What does your manual say? =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: how to get into simulation mode?
LOL....a model number might be nice also. My psychic powers have not shown any improvement over the years. Like most of my fellow techs---reluctant to give out service mode access but since a simple search in this forum yields this info anyway......most sharps use # - * - C - *. Don't know what good this info will do you if you don't even have the service manual to explain what each mode/adjustment does. You may end up doing more harm than good. Be smart and buy the manual online. They don't cost much anyway.sigpicAnything can be made to work if you fiddle with it long enough- San Diego Copier Repair.comComment
-
Re: how to get into simulation mode?
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:
Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Comment
Comment