SHARP MX-3501N PPD1_S2 Jams

[harleyrider]

Re: SHARP MX-3501N PPD1_S2 Jams

inside the bypass tray

[mttech]

Re: SHARP MX-3501N PPD1_S2 Jams

This sensor is in the bypass tray. See page 5-7 in the service manual and 13-21 in the parts manual. Good luck.

[servicopy.hillo]

Re: SHARP MX-3501N PPD1_S2 Jams

Thanks!

Let me Check!

[Jorabi]

Re: SHARP MX-3501N PPD1_S2 Jams

How did the story end?

[kev577]

Re: SHARP MX-3501N PPD1_S2 Jams

Isn't there some sensors on the back of the process drive pack that get dust and grease on it? I think 23-2 shows code and jam happen at same time

[servicopy.hillo]

Re: SHARP MX-3501N PPD1_S2 Jams

Don't you gon'a believe.. but was a sensor from delivery unit POD1 (literaly) broken... Just Replace the sensor & thats end of the story =P