AR-M455 locking up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Buddy
    Trusted Tech

    250+ Posts
    • Aug 2009
    • 285
    #1

    AR-M455 locking up

    Hi Guys,

    I have one that freezes the fax function. It's intermittent. When it happens, the customer can't enter a fax number. I also had a "Maximum number of jobs has been already reserved" message. I've gone out there and the only thing that will

    clear it is unplugging the copier and then rebooting.

    Any ideas?

    Thanks
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22996
      #2
      Re: AR-M455 locking up

      Clear the fax image memory. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Buddy
          Trusted Tech

          250+ Posts
          • Aug 2009
          • 285
          #3
          Re: AR-M455 locking up

          Thanks Black Cat. Are talking about SP66-10? Thanks again.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22996
              #4
              Re: AR-M455 locking up

              Yes sir. Machines of this era did not automatically purge the image memory after a specific period of time, unlike the newer machines. Therefore failed transmissions had an unpleasant way of collecting in the memory and not going away. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...