MXM264

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Shaun.hfd
    Junior Member
    • Dec 2012
    • 2
    #1

    [Dead] MXM264

    Hi all

    I have a Sharp MXM264 that after doing 4 copies of a 5 copy run the machine reboots. So far it has had a fuser, transfer, main board, LV PSU, HV PSU and firmware. All wiring looms appear ok and the earths check out. Any ideas?
    Tags: None
    • Akitu
      Legendary Frost Spec Tech

      Site Contributor
      2,500+ Posts
      • Oct 2010
      • 2595
      #2
      Re: MXM264

      Check the voltages, if they spike low enough during operation it would make sense it loses power.
      Cthulhu for president! Why settle for the lesser evil?

        Comment

        • igi
          Service Manager

          1,000+ Posts
          • Apr 2009
          • 1507
          #3
          Re: MXM264

          hi check the hdd and any extra memory if seated correctly

            Comment

            • Akitu
              Legendary Frost Spec Tech

              Site Contributor
              2,500+ Posts
              • Oct 2010
              • 2595
              #4
              Re: MXM264

              Originally posted by igi
              hi check the hdd and any extra memory if seated correctly
              Machine does not come standard with HDD.
              Cthulhu for president! Why settle for the lesser evil?

                Comment

                • skookumchuck
                  Technician

                  50+ Posts
                  • Feb 2012
                  • 62
                  #5
                  Re: MXM264

                  Power supplies on these are crap. We've lost a couple over the past year or so. Usually they just cook. They have a new one available. Doesn't look like it's the power supply in your case.

                    Comment

                    Previous template Next
                    Working...