Sharp MX4100n Lead edge off

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Deer John
    Technician
    • Aug 2013
    • 21
    #1

    Sharp MX4100n Lead edge off

    The lead edge of copies from tray 1 is off (late) by about 1/2 inch.
    I have tried the adjustments in the svc programs including paper buckle to no avail. It does it thru the SPF as well as on glass. Let's start with this question:
    what specifically is the most effective adjustment program for this problem?
    The array of adjustments is bewildering and I may not be seeing the forest for the trees so to speak.
    I appreciate the input.
    Tags: None
    • ntbann
      Senior Tech

      500+ Posts
      • Jan 2012
      • 626
      #2
      Re: Sharp MX4100n Lead edge off

      Did you run a 50-22?

        Comment

        • faxman28
          Trusted Tech

          Site Contributor
          250+ Posts
          • Nov 2010
          • 436
          #3
          Re: Sharp MX4100n Lead edge off

          adj 17 and 18A in the manual(adjustment section chapter 5) or do 50-28(auto adjustment ,27c in chapter 5). when you do the adjustment does your lead edge change ? if not could be scanner or pcu pwb, depending on copy or print mode .

            Comment

            Previous template Next
            Working...