MX-M363N jams at before PS rollers -PPD2_N1 SOLUTION

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Toner Boy
    Trusted Tech

    Site Contributor
    250+ Posts
    • Aug 2007
    • 349

    MX-M363N jams at before PS rollers -PPD2_N1 SOLUTION

    Motor driver board, check for 24 volts missing at CN1, pins 1&2. Voltage was present (24) at other connectors on PWB.
    Was jamming at pre-registration from all cassettes. PFM motor not turning (PS front transport motor).
Working...