[Dead] MX-2010

[Guest]

Hi Guys, i'm new to this forum.Hope i'm not to in a hurry but i really need some advise. I have a Sharp MX-2010, when you switch it on the display stays dead, the scanner unit moves and after that the exhaust fan keeps on running and nothing happens after that. please advise if you had a similar problem and thanks so much in advance.

[drowranger]

Re: MX-2010

check the memory module installed correctly. if you can boot it up run a sim 60-1 to check memory.

also check the 4 leds located near the hdd sata cable. all 4 leds should be on.

[igi]

Re: MX-2010

hi if hard-drive installed,check it first
then MFP pwb

[igi]

Re: MX-2010

hi did you came right?
some feedback.

[ZOOTECH]

Re: MX-2010

hi did you came right?
some feedback.

(HIT AND RUN!) We will probably not get a fix from him.

[Joubert]

Re: MX-2010

Hi Guys

Thanks alot for all your advise.'drowranger' I checked the memory, refitted the card and checked 4 the led's you suggested but still did not boot up.
'igi' The printer does not have an HD, well I replaced the Mfp pwb you suggested but still no luck.

I think the problem might be on the sd card located on the Mfp pwb as boot data is stored on it.I ordered it today and should have it tomorrow.

Will give feedback as soon as I received it.
Thanks again

[leong.supertroni]

Re: MX-2010

Can try emergency update

Sent from my GT-N7000 using Tapatalk

[Joubert]

Re: MX-2010

Hi Guys
I received the sd card 2day, replaced it and my printer booted and is working 100%.

Thanx again for all the advise......

'leong.supertroni',can you advise on how to do the emergency update the next time i have a similar problem?

Thank you

[leong.supertroni]

Re: MX-2010

Please refer to service manual

Sent from my GT-N7000 using Tapatalk

[NeoMatrix]

Re: MX-2010

(HIT AND RUN!) We will probably not get a fix from him.

[Off topic]
Yes it's a tad sad there are a fare share of HARE's (Hit-And-Run-Experts/End user's) on CTN.
You would like to believe the courtesy offered to assist would be the courtesy returned with a simple explanation of the final fix.

It's a bit like watching a mini-series on TV: you keep waiting for the climatic end, only to have to wait for follow-up series to start again next year.

Ok the suspense is numbing.... what was the final outcome....?

[ZOOTECH]

Re: MX-2010

[Off topic]
Yes it's a tad sad there are a fare share of HARE's (Hit-And-Run-Experts/End user's) on CTN.
You would like to believe the courtesy offered to assist would be the courtesy returned with a simple explanation of the final fix.

It's a bit like watching a mini-series on TV: you keep waiting for the climatic end, only to have to wait for follow-up series to start again next year.

Ok the suspense is numbing.... what was the final outcome....?

We will likely never know!