FattDaddy

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22997
    #1

    FattDaddy

    The reason that nobody is responding to your thread is they can't.

    When the last word in the title is "print", the information is displayed as a print screen without the links. My recommendation is to entitle your thread with a different word than "print".

    To print directly from your laptop to the MFP you have two choices:

    1) Use a USB cable, and load a driver.
    2) Use a crossover cable. Set the printer and laptop to IP's in the same range. Load a print driver.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Tags: None
    • didi2005
      Trusted Tech

      250+ Posts
      • May 2011
      • 401
      #2
      Re: FattDaddy

      Originally posted by blackcat4866
      The reason that nobody is responding to your thread is they can't.

      When the last word in the title is "print", the information is displayed as a print screen without the links. My recommendation is to entitle your thread with a different word than "print".

      To print directly from your laptop to the MFP you have two choices:

      1) Use a USB cable, and load a driver.
      2) Use a crossover cable. Set the printer and laptop to IP's in the same range. Load a print driver.

      =^..^=
      3) Use a straight/normal network cable. Set the printer and laptop to IP's in the same range. Load a print driver.

        Comment

        • Fattdaddy
          Technician
          • Aug 2012
          • 38
          #3
          Re: FattDaddy

          Hey guys thank you Didn't get notified of responses. Will have to go USB as computer is on a network that I can't put the copier on. For future do I need the crossover or normal cable?

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22997
              #4
              Re: FattDaddy

              Most modern computers can automatically re-configure themselves if they identify a connection. My old Thinkpad XP wasn't smart enough for that, so I needed a crossover cable.

              This is not the thread you started, so you won't get notifications until you post into this one. Did you read the part about the word "print" as the last word in the title? =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Fattdaddy
                  Technician
                  • Aug 2012
                  • 38
                  #5
                  Re: FattDaddy

                  Yes I did blackcat Thanks for your help

                    Comment

                    Previous template Next
                    Working...