e-Studio 191f Fax, routing of the Paper Feed Motor Belt in the ADF...

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Oystercopy
    Senior Tech

    Site Contributor
    500+ Posts
    • Oct 2009
    • 623
    #1

    e-Studio 191f Fax, routing of the Paper Feed Motor Belt in the ADF...

    I can't believe how lousy and low resolution this manual's pictures are! I had to replace a broken plastic guide the ADF section and can't seem to figure out how to re-route the drive belt in the correct position? I know this is a Panasonic made machine, but I'm guessing the pictures in that manual would be the same. If I ever have to reference Konica Minolta's manuals for stuff like this, you can bet they're high res pics so you can actually SEE whats going on! By the way, the pics I'm talking about are on page 41 of the SM. Thanks guys..
    OC
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: e-Studio 191f Fax, routing of the Paper Feed Motor Belt in the ADF...

      Sorry, I've not had the pleasure. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • Oystercopy
          Senior Tech

          Site Contributor
          500+ Posts
          • Oct 2009
          • 623
          #3
          Re: e-Studio 191f Fax, routing of the Paper Feed Motor Belt in the ADF...

          Originally posted by blackcat4866
          Sorry, I've not had the pleasure. =^..^=
          No problem dude.. I eventually figured it out. What a PAIN...

            Comment

            Previous template Next
            Working...