Toshina 4540C service mode code

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jper34
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2011
    • 225
    #1

    Toshina 4540C service mode code

    Hi foljs,Im trying to get into service mode to adjust registration for document feeder, after hitting 0&5 while turning power on, screen leads me to service, and asks for pssword, I tried many combinations, to no avail.any help appreciated..Thanks !
    Jaime
    Inep. Copier Svc.
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23009
      #2
      Re: Toshina 4540C service mode code

      Did you try 'no password', meaning blank? If it's been changed, that's another story. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • jper34
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2011
          • 225
          #3
          Re: Toshina 4540C service mode code

          Originally posted by blackcat4866
          Did you try 'no password', meaning blank? If it's been changed, that's another story. =^..^=
          yeah..I tried it blank, said incorrect password

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 23009
              #4
              Re: Toshina 4540C service mode code

              Is this the same machine with the F109_4? Perhaps the service password is corrupt? I'd go to 3C and perform a reformat, then a service password reset, then reload firmware. Follow the instructions in the manual.

              I'm thinking that your HDD is toast. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                Previous template Next
                Working...