estudio 2330c paper tray thunking

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Buddy
    Trusted Tech

    250+ Posts
    • Aug 2009
    • 285

    #1

    estudio 2330c paper tray thunking

    Hi Guys,

    I have a machine that will not lift the paper booster consistently. When the tray is filled with paper, I get the thunking noise from the lift motor trying to put the paper in position. It looks like there is a clutch pack in the back of the machine. Is there a cheap fix, or does the entire clutch assembly have to be replaced?

    Thanks!

    Also, does anyone know where I can get a manual? (Servicemanuals.net doesn't have one.)
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23009

    #2
    Re: estudio 2330c paper tray thunking

    Check the lift motor assembly. The drive coupler on the machine side can shatter into small bits. You can order the coupler gear separately.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • nekowaiidesu
      Technician

      50+ Posts
      • Dec 2015
      • 65

      #3
      Re: estudio 2330c paper tray thunking

      send me a pm

      Comment

      • Buddy
        Trusted Tech

        250+ Posts
        • Aug 2009
        • 285

        #4
        Re: estudio 2330c paper tray thunking

        Originally posted by nekowaiidesu
        send me a pm
        Sent a pm Neko. Thanks!

        Comment

        • Buddy
          Trusted Tech

          250+ Posts
          • Aug 2009
          • 285

          #5
          Re: estudio 2330c paper tray thunking

          Thanks Blackcat. I'll check it.

          Thanks also Neko. I got my hands on a manual.

          Comment

          Working...