Replaced BPU in ES-356SE

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • noobie1
    Technician
    • Jun 2015
    • 48
    #1

    Replaced BPU in ES-356SE

    Hi guys,

    Im hoping that someone could tell me, why cleaning/drum and fuser is blank what does it mean? did i miss something? what is the next step after replaced BPU and reset all the counters? im stack in here i could proceed to print..please help..
    IMG_20161120_161822.jpg
    Last edited by noobie1; 11-20-2016, 03:50 PM. Reason: the title miss spell
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: Replaced BPU in ES-356SE

      What's a "BPU"? I don't mind if you make up acronyms as long as you explain them.

      I'll make a guess that you mean the black imaging unit. The reason that the Fuser count shows blank is because there are 6 or 7 things in the sub menu, quite possibly with totally different counts. If you've changed all the kit parts for the fuser just highlight Fuser then clear. If you replaced only a couple items on the sub-menu, highlight Fuser, then Sub, then the specific item that you changed, then clear.

      If you changed the whole imaging unit, you'll need to reset counters for drum, blade, primary, grid, and developer. Then you'll leave the toner cartridge out while you run the developer stir in 6S-1, and follow the prompts to do a auto calibration.

      Since I can't be certain what this "BPU" is, I can't be certain exactly what you replaced. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • noobie1
          Technician
          • Jun 2015
          • 48
          #3
          Re: Replaced BPU in ES-356SE

          Originally posted by blackcat4866
          What's a "BPU"? I don't mind if you make up acronyms as long as you explain them.

          I'll make a guess that you mean the black imaging unit. The reason that the Fuser count shows blank is because there are 6 or 7 things in the sub menu, quite possibly with totally different counts. If you've changed all the kit parts for the fuser just highlight Fuser then clear. If you replaced only a couple items on the sub-menu, highlight Fuser, then Sub, then the specific item that you changed, then clear.

          If you changed the whole imaging unit, you'll need to reset counters for drum, blade, primary, grid, and developer. Then you'll leave the toner cartridge out while you run the developer stir in 6S-1, and follow the prompts to do a auto calibration.

          Since I can't be certain what this "BPU" is, I can't be certain exactly what you replaced. =^..^=
          @blackcat4866 its was label as PU according the box and i think you're right it a whole imaging unit wherein printing process is pass. I just followed your direction about reset all counters because its a whole imaging unit that i replaced on it in the machine. i was stack with this problem after doing the 6S-1 with auto calibration , the next step that i shoud do is to print test the A4/LT in the machine and this is which came out i will show it to you if you could advise me what is the problem of this.

          IMG_20161122_130951.jpg

          i tried already replaced the separation roller but the same happened.

            Comment

            • Blizzoo
              Senior Tech

              Site Contributor
              500+ Posts
              • Aug 2013
              • 605
              #4
              Re: Replaced BPU in ES-356SE

              For that jam you have in the photo adjust the SFB feed guide, looks like is bowed too much. Do you have a jam code?
              Defects are simple, our mind is complicated

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22997
                  #5
                  Re: Replaced BPU in ES-356SE

                  Originally posted by Blizzoo
                  For that jam you have in the photo adjust the SFB feed guide, looks like is bowed too much. Do you have a jam code?
                  So you have a jam condition? I didn't see that anywhere? If perchance it's an E010 jam, you might replace lower bypass guide (6LH51460000) and mylar (6LH51432000). Or file oval the mounting holes. Trim 3 wraps off of the bypass separation pad spring. Press the guide in while tightening screws.

                  The lower bypass guide is warped out at the center by bypass separation pressure spring. An oval wear mark becomes visible 83mm x 5mm.
                  =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...