E-Studio 232 Op panel lights, but nothing else

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Buddy
    Trusted Tech

    250+ Posts
    • Aug 2009
    • 285
    #1

    E-Studio 232 Op panel lights, but nothing else

    Hi Guys,

    This is actually an IM2330, but it crosses over to an estudio 232. Flip on the power switch and the display lights, but all I see is the image of a copier. The machine doesn't cycle at all like it normally would during warm up. The fans do come on.

    Funny thing is if I open the front door, the fans turn off but after the door is closed again, only one of the fans comes back on.

    Any ideas?

    Thanks!
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 23009
      #2
      Re: E-Studio 232 Op panel lights, but nothing else

      What have you done so far? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • toshibaestudio
          Trusted Tech

          100+ Posts
          • Jun 2016
          • 116
          #3
          Re: E-Studio 232 Op panel lights, but nothing else

          Looks like hdd problem.

          What u can do is initialize HDD (08-690).

          If lucky, problem solve and machine is ready.

          If come back again, u might need to replace the HDD...

            Comment

            • Buddy
              Trusted Tech

              250+ Posts
              • Aug 2009
              • 285
              #4
              Re: E-Studio 232 Op panel lights, but nothing else

              Thanks guys,

              Haven't done anything to it yet Blackcat, other than pulling the plug.

              I'll try to reformat the HD tstudio.

              Thanks!

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 23009
                  #5
                  Re: E-Studio 232 Op panel lights, but nothing else

                  Originally posted by Buddy
                  ... Haven't done anything to it yet Blackcat, other than pulling the plug...
                  That's what I thought. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    • riyadh hossainbd
                      Trusted Tech
                      • Dec 2015
                      • 239
                      #6
                      Re: E-Studio 232 Op panel lights, but nothing else

                      Originally posted by buddy
                      hi guys,

                      this is actually an im2330, but it crosses over to an estudio 232. Flip on the power switch and the display lights, but all i see is the image of a copier. The machine doesn't cycle at all like it normally would during warm up. The fans do come on.
                      Funny thing is if i open the front door, the fans turn off but after the door is closed again, only one of the fans comes back on.

                      Any ideas?

                      Thanks!
                      1, ram
                      2,firmware update
                      3,change hdd

                        Comment

                        • Buddy
                          Trusted Tech

                          250+ Posts
                          • Aug 2009
                          • 285
                          #7
                          Re: E-Studio 232 Op panel lights, but nothing else

                          No luck resetting Guys. I had to input blind because even though I ran 08, I couldn't see anything. I did notice when I entered the keys, there was no beeping.

                            Comment

                            • onlineprofitinternetshop
                              Technician
                              • Jul 2016
                              • 17
                              #8
                              Re: E-Studio 232 Op panel lights, but nothing else

                              this is what happened to my IM2330 machine.., this machine have same logic board to ESTudio Toshiba 232 that's why I tried to changed the whole set main board, hdd and memory.. its same parts as long as compatible.

                              Hard disk problem, main board problem or ram problem. Try to reassembly those three parts main board, hard disk and memory clean it up and assemble again. If the problem still same you may change first memory... if its the same then go for hard disk

                                Comment

                                Previous template Next
                                Working...