Toshiba ES 232 Stuck with error code

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • raveendrala
    Technician
    • Oct 2016
    • 79

    #1

    Toshiba ES 232 Stuck with error code

    Hello,


    I gotToshiba ES 232 , It was Stuck with error code F130, "Mac address not assigned".
    Any help would be great,



    Thank you

  • ARMAN.MZ
    Trusted Tech

    100+ Posts
    • Sep 2016
    • 100

    #2
    Re: Toshiba ES 232 Stuck with error code

    Originally posted by raveendrala
    Hello,


    I gotToshiba ES 232 , It was Stuck with error code F130, "Mac address not assigned".
    Any help would be great,



    Thank you

    test it
    in mode 08 693



    Telegram ID : @armanmahzun

    Comment

    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997

      #3
      Re: Toshiba ES 232 Stuck with error code

      Can you view the MAC address? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

      Comment

      • Thomas007
        Technician
        • Jul 2013
        • 49

        #4
        Re: Toshiba ES 232 Stuck with error code

        What you did before?

        Do you clear NvRAM?

        If yes you need enter serial number in code 08 and 05. MAC addres is generated based serial number.

        Originally posted by raveendrala
        Hello,


        I gotToshiba ES 232 , It was Stuck with error code F130, "Mac address not assigned".
        Any help would be great,



        Thank you

        Comment

        • raveendrala
          Technician
          • Oct 2016
          • 79

          #5
          Re: Toshiba ES 232 Stuck with error code

          I changed Main board Problem solved .

          Thank you guys for your help

          Comment

          Working...