Re: prevent ip conflict
There is a setting in TopAccess to disable so that the copier will hold on to its static IP whenever an IP conflict occurs. Otherwise it will reset to 0.0.0.0 once it detects an IP conflict.
Open TopAccess by keying in the IP address of the copier into any internet browser.
Go under Administration
Login. Default pw is 123456
Go under Network
Somewhere under the first option you should see IP conflict detect. Depending on models. Not all model has this option.
There is a setting in TopAccess to disable so that the copier will hold on to its static IP whenever an IP conflict occurs. Otherwise it will reset to 0.0.0.0 once it detects an IP conflict.
Open TopAccess by keying in the IP address of the copier into any internet browser.
Go under Administration
Login. Default pw is 123456
Go under Network
Somewhere under the first option you should see IP conflict detect. Depending on models. Not all model has this option.
Comment