E-Studio 520 toner get stopped in Transport Belt Case.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sbarro
    Trusted Tech

    100+ Posts
    • Feb 2008
    • 176
    #1

    E-Studio 520 toner get stopped in Transport Belt Case.

    Toner is getting stopped in Transport Belt Case and then forcing Belt Cleaning Blade and get thru the blade always exactly in one place ~7-8 cm from exit. Situation is happen again after few days. I hope you understand what i have written Then we got Drum with scraches in this place after ~200k. I did change Belt, Brush, Blade , vacuum whole pipe and AUGER-TRU. I did run few copies with covers open to confirm that it works.
    We try to speed up (08-455/456 - think so) but it goes even worse.
    Any help ??
    "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

    "    What do you despise? By this you are truly known"

    Guess who
    Tags: 520, amou, belt, brush, cleaning blade, covers, estudio, stopped, toner, transport
    • Sbarro
      Trusted Tech

      100+ Posts
      • Feb 2008
      • 176
      #2
      Maybe some photos will clear this up ??
      "A process cannot be understood by stopping it. Understanding must move with the flow of the process, must join it and flow with it"

      "      What do you despise? By this you are truly known"

      Guess who

        Comment

        • tsbservice
          Field tech

          Site Contributor
          5,000+ Posts
          • May 2007
          • 8016
          #3
          Yes, please I'm interested with your problem but for me description sounds a little unclear.
          A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
          Blessed are they who can laugh at themselves, for they shall never cease to be amused.

            Comment

            • mckinley
              Chief Twiddler

              100+ Posts
              • Dec 2006
              • 150
              #4
              if your transfer cleaner is filling up with toner, either the cleaning system ( brush, motor, etc ) isn't driving, or you have a blockage where the toner drives from the belt unit to the waste box ( on the rear of the machine ) maybe worth checking the waste pipe & mechanism on the rear of m/c.
              if my memory serves me well, 08-455/456 are toner / recycled toner supply amounts.
              Happiness Is The Road.

                Comment

                Previous template Next
                Working...