e-studio 232 no power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tmaged
    Owner/Service Manager

    Site Contributor
    1,000+ Posts
    • Oct 2008
    • 1887

    #1

    e-studio 232 no power

    On of my techs goes on a call today for a dead ES232. He checks the voltage at the surge, it's good. Unplugged the network cable & the machine powered on. They said it had shut off 4 times this AM. My tech left the network cable unplugged & they said it was fine all afternoon. If we plug network back in tomorrow & it looses power, I'm planning on putting a switch in between. Any ideas or anyone seen anything like this. I don't think it's a POE connection but could that cause it?
    Thanks for any suggestions.
    Hope that helps !
    -Tony
    www.dtios.com
    Become a fan on Facebook
  • ivovb
    Senior Tech

    500+ Posts
    • Apr 2008
    • 695

    #2
    Toshiba machines are quite sensitive to power problems. So reformat the HDD and re-flash the firmwares. Check grounding of machine.
    I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

    Comment

    Working...