[Misc] Toshiba e-Studio4505AC is printing lines on page

[Guest]

I have a Toshiba e-Studio4505AC at my office and recently it has started printing black lines horizontally across the bottom of each page. I have tried cleaning every drum and roller I can access as well as cleaning and changing the cartridges but it is still persisting. Does any one have any tips or tricks on how to fix this? I have attached a link to a photo of the issue I am having.

https://i.imgur.com/a0kAiWK.jpg

[Phil B.]

Re: Toshiba e-Studio4505AC is printing lines on page

I have a Toshiba e-Studio4505AC at my office and recently it has started printing black lines horizontally across the bottom of each page. I have tried cleaning every drum and roller I can access as well as cleaning and changing the cartridges but it is still persisting. Does any one have any tips or tricks on how to fix this? I have attached a link to a photo of the issue I am having.

https://i.imgur.com/a0kAiWK.jpg

clearly you aren't a trained tech.

so we need:

page counts on PM parts.

what did you 'clean' the parts with?

Genuine OEM supplies (toners/drum)?

what all has been done to the unit?

pm's done properly and on time?

[SalesServiceGuy]

Re: Toshiba e-Studio4505AC is printing lines on page

Does this occur only on print jobs?

Does this occur on copy jobs?

What is the meter read on the copier?

Have you called your local service provider for an on-site visit?

[Thayer]

Re: Toshiba e-Studio4505AC is printing lines on page

Pull fuser unit and inspect.

[tsbservice]

Re: Toshiba e-Studio4505AC is printing lines on page

ALWAYS start with machine counters and consumables life. Your most likely culprits are parts near/over their life. Looks like drum pattern.

[blackcat4866]

Re: Toshiba e-Studio4505AC is printing lines on page

ALWAYS start with machine counters and consumables life. Your most likely culprits are parts near/over their life. Looks like drum pattern.

If the pattern repeats at 94mm it's the drum.
If the pattern repeats at 96mm it's the fuser film.

That being said, if you aren't a technician you can cost yourself a lot more money by doing it yourself. Some of the most expensive calls that I've done have been to repair the results of an enduser repairing a copier. Please trust me when I tell you that neither of these repairs are simple enough for a novice.
=^..^=

[tsbservice]

Re: Toshiba e-Studio4505AC is printing lines on page

If the pattern repeats at 94mm it's the drum.
If the pattern repeats at 96mm it's the fuser film.

That being said, if you aren't a technician you can cost yourself a lot more money by doing it yourself. Some of the most expensive calls that I've done have been to repair the results of an enduser repairing a copier. Please trust me when I tell you that neither of these repairs are simple enough for a novice.
=^..^=

BC, Thank you for clarification. Don't have docimentation but I was thinking the same line, it's clear that pattern is there it would took like 2 minute of tech's time to measure or see exact fault.