Re: e-Studio 457, not fusing...
I wonder why it was so low? Good catch. =^..^=
I wonder why it was so low? Good catch. =^..^=
-
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: e-Studio 457, not fusing...
30 degrees omg
. OC somebody seriously messed with that machine or if it was new blame Toshiba.
I used to lower fusing temperature on my Toshibas to prolong a bit fuser life. But with only 10 degrees, maybe from 200 to 190 or from 190 to 180. That worked well for me but I kept close eye on the machine for a period to make sure fusing is proper in any conditions.A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.Comment
-
Re: e-Studio 457, not fusing...
Yes, thanks for all that guys... I should not have had to mess with this, but I cannot say if a tech changed that setting from when the machine was new, since I did sell it used to the customer.... Will be going out to another machine with similar issues today and if I find the same thing, that's likely a Toshiba issue, from the start.
OCComment
-
Re: e-Studio 457, not fusing...
Went to the SECOND machine yesterday... same thing, machine set to 4 instead of 10. Too random to be a tech setting, so must have come from the factory that way, I believe.
Gotta love Toshiba.
OCComment
-
Re: e-Studio 457, not fusing...
Are your Toshiba devices connected to Toshiba Cloud Connect? If yes then you might have some 08 setting codes policies in place.Defects are simple, our mind is complicatedComment
Comment