Toshiba 3505 Ac color alignment ( please help )

[Aban print]

Hi everyone
I recently bought a Toshiba 3505Ac color machine that has been used a little.
The red color is not aligned when printing and copying.
I live in Iran and there is no professional repairman for this machine.
I saw a few videos on YouTube about this and followed their solutions:
i did auto calibration from administrator setting/general/calibration/copy and 600dpi and 1200 dpi print calibration then after i did registration and that's all.
and red color is same as it was before.
i did upload a main and a printed image for example.
Can anyone help me?
Thanks
main image.jpg printed image.jpg

[mojorolla]

Enter service mode and perform Color Deviation Adjustment (05-9062). You will need to put paper in the bypass tray to perform this adjustment.

[Rusty.Harris]

If you are "just an end user" and don't have access to service mode, press user function, admin, admin password, general, registration and do the color registration.
That may get it closer. Also, to the left of registration, is color calibration. It will print out a sheet with the color bars, and a set of black bars at the top. Place that
on the glass with the black bars to the left, and then press ok/start to scan.

[Aban print]

If you are "just an end user" and don't have access to service mode, press user function, admin, admin password, general, registration and do the color registration.
That may get it closer. Also, to the left of registration, is color calibration. It will print out a sheet with the color bars, and a set of black bars at the top. Place that
on the glass with the black bars to the left, and then press ok/start to scan.

i did all of those already