Tech setting one of these up, at power on C4E0 error. We were setting up a batch of machines, swapped fuser. 03 mode for the fuser and it had a slight humming sound, but did not turn. Upon removing the drive assembly, he spotted the problem right off the bat! A shard of the plastic that has to be removed, for the bridge unit, wedged in between the drive motor and the gear.
Sometimes it's the smalled of things, that cause the issues.
PXL_20250402_152946554.RAW-01.COVER.jpg of things, that cause the issues.
Sometimes it's the smalled of things, that cause the issues.
PXL_20250402_152946554.RAW-01.COVER.jpg of things, that cause the issues.