Re: Prints have dark bands on bottom of page
Thanks for the reply
You're probably right.
The smudge faded and disappeared after about 15 prints, so I never checked where it came from.
Prints have dark bands on bottom of page
Collapse
X
-
Re: Prints have dark bands on bottom of page
I think you might have hardened toner on the pressure roller in fuser unit, have a look thereLeave a comment:
-
Re: Prints have dark bands on bottom of page
Since I only print Black/White I changed drum between black and cyan and the banding disappeared.
But now I have black "smudge" on the backside of printed paper.
What can be the cause of such behavior?
I will investigate furtherLeave a comment:
-
Re: Prints have dark bands on bottom of page
attached is a photo of a blank page.
/beppe293015373_1490454194724825_3892870794250771415_n.jpgLeave a comment:
-
Prints have dark bands on bottom of page
Hi
I am trying to keep a Toshiba E-Studio 2040c going.
Now there is dark banding on bottom om every printed page.
I have done the maintenance according to chapter "Cleaning the slit Glass and Main Chargers" in the troubleshoot-manual but no luck, the banding persists.
What are to be cleaned to get rid of these bands?
/beppe
PS
And if someone have access to a Service Manual for E-Studio 2040c I would really appreciate a link or an email with it.
DS
Leave a comment: