e Studio 2500ac wanted firmware

[Logged-on]

Re: e Studio 2500ac wanted firmware

try precision roller, precisionroller.com

[lazzimau]

Re: e Studio 2500ac wanted firmware

I do have this manual. I occasionally share manuals with members of long standing, and members that contribute to Copytechnet. Some members contribute with a financial donation to support the website. Others contribute by assisting other members with their issues.



It is not a normal 2.5 HDD. It's a Toshiba Wipe Drive that encrypts the data. You cannot substitute another type. =^..^=

thanks.

where can i buy it?

regards

[blackcat4866]

Re: e Studio 2500ac wanted firmware

... do you have a manual to disassembly the printer? ...

I do have this manual. I occasionally share manuals with members of long standing, and members that contribute to Copytechnet. Some members contribute with a financial donation to support the website. Others contribute by assisting other members with their issues.

... is it a normal 2.5 hdd?

It is not a normal 2.5 HDD. It's a Toshiba Wipe Drive that encrypts the data. You cannot substitute another type. =^..^=

[lazzimau]

Re: e Studio 2500ac wanted firmware

There's a very small chance that you've got a bad system board. Much more likely, it's a bad HDD ... yes, even though it will do a format.

I've seen one bad system board for issue, and maybe hundreds of bad hard drives. =^..^=

thanks for your reply.

so i have to change hdd. do you have a manual to disassembly the printer? is it a normal 2.5 hdd?

[blackcat4866]

Re: e Studio 2500ac wanted firmware

There's a very small chance that you've got a bad system board. Much more likely, it's a bad HDD ... yes, even though it will do a format.

I've seen one bad system board for issue, and maybe hundreds of bad hard drives. =^..^=

[lazzimau]

Re: e Studio 2500ac wanted firmware

The last machine that needed the mentus2.0 file is the eS350.

Extract the firmware file, & copy the extracted files to the USB stick. Power on into 49 mode ...
=^..^=

i tried with 2 different firmwares, but still the same result, it goes back to the f101 error screen and everything is blocked.
the hdd formats without problems
Thanks for your help

[lazzimau]

Re: e Studio 2500ac wanted firmware

in the usb i've the folder 2000AC_2500AC but when I press normal update the printer goes back to the f101 error screen and everything is blocked and I have to turn it off by unplugging it

[blackcat4866]

Re: e Studio 2500ac wanted firmware

to update firmware from usb i have to put in the usb the file mentusb2.o and the folder 2000AC_2500AC, right? i don't have the file mentusb2.o, help me please.

The last machine that needed the mentus2.0 file is the eS350.

Extract the firmware file, & copy the extracted files to the USB stick. Power on into 49 mode ...
=^..^=

[lazzimau]

Re: e Studio 2500ac wanted firmware

to update firmware from usb i have to put in the usb the file mentusb2.o and the folder 2000AC_2500AC, right? i don't have the file mentusb2.o, help me please.

[aalex_bom]

Re: e Studio 2500ac wanted firmware

hi, i'm looking for e-studio 2500ac firmware, i've formatted hdd after error F101 and now i think i need a new firmware to upload by usb, right?
thanks a lot

check PM, please

[lazzimau]

Re: e Studio 2500ac wanted firmware

hi, i'm looking for e-studio 2500ac firmware, i've formatted hdd after error F101 and now i think i need a new firmware to upload by usb, right?
thanks a lot

[123Stairs]

Re: e Studio 2500ac wanted firmware

My stupidity was that I watched a movie on YT where a "specialist" suggested step by step how to save my printer when there is an error F103. Of course, it appeared there that I MUST format the disk. Later it turned out to be a scammer but I have a big problem now

Here is a link to a movie on YT, maybe someone will not be fooled by it:

https://youtu.be/8ryixaJSjK0

[blackcat4866]

Re: e Studio 2500ac wanted firmware

I've heard that members that contribute to this website often get their wishes. =^..^=

[123Stairs]

Re: e Studio 2500ac wanted firmware

Thank you very much.

I am at the stage of disk format, which means I will definitely need firmware. Can you help me?

[blackcat4866]

Re: e Studio 2500ac wanted firmware

There you go. When you get to the part about formatting the HDD, if you format the HDD your firmware will be gone.
=^..^=