4505AC time for Periodic Mainternance 010F

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • longyen.hcm@gmail.com
    Technician
    • Jan 2023
    • 13
    #1

    4505AC time for Periodic Mainternance 010F

    Hi Guys, its me again. Im a newbie
    my tsb 4505AC got a message “time for periodic mainternance 010F” and when i print 200pages its going like after every 30 pages then adjusting and calibrating for a minute, then resume printing job. Is there anyway we can fix. Many thanks in advance.
    Tags: 010f, 4505ac, mainternance, periodic, periodic maintenance
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22997
      #2
      Re: 4505AC time for Periodic Mainternance 010F

      It sounds to me like it's due for some maintenance. Have you looked at section 7.2.3 of your service manual ... or better yet printed off FS30-103 PM list? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • longyen.hcm@gmail.com
          Technician
          • Jan 2023
          • 13
          #3
          Re: 4505AC time for Periodic Mainternance 010F

          Originally posted by blackcat4866
          It sounds to me like it's due for some maintenance. Have you looked at section 7.2.3 of your service manual ... or better yet printed off FS30-103 PM list? =^..^=
          Yes sir, many thanks for your kindly advice. Appreciated

            Comment

            Previous template Next
            Working...