Toshiba eStudio 256SE authentication fail

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sanjayalk1
    Technician
    • Feb 2019
    • 10
    #1

    Toshiba eStudio 256SE authentication fail

    Hi all,

    I got the following error on Toshiba eStudio 256SE "authentication fail" when using 3c mode

    Machine got f106 error and changing hdd got this error on 3c mode

    Is anyone got this error or anyone have a solution for this error...

    IMG-20230519-WA0010.jpg
    Tags: authentication required, error, estudio, mode, toshiba
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22932
      #2
      Re: Toshiba eStudio 256SE authentication fail

      Hold on a second.

      So, you installed a HDD ... is it a WIPE drive? Is it new, or at least functional? Did the system board get changed also, or some other board?

      Were I to guess, I'd say that you got this machine used as off-lease. The HDD got removed at decommission, then the system board got "borrowed" to repair another machine. So, the system board in your machine is either defective, or doesn't have the data it should, because it has never completed installation.
      Last edited by blackcat4866; 05-20-2023, 07:24 PM.
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        Previous template Next
        Working...