toshiba e-studio 3511 CEEO Error Code

[Techace]

I am facing a problem in toshiba machine ERROR CODE CEE0. kindly help me. I am looking for the posittive response.

thanks

Techace

[JustManuals]

From the Service Handbook:
Transfer belt marker detection abnormality (normal operation):
The home position of the transfer belt cannot be detected.

HtH
Paul@justmanuals.com

[TTL]

check if the sensors in the transfer belt are clean, they may be dirty.
check if they are working normally.

[Nazakat]

Dear Friend !

Better if you install bright silver sticker or tape on the reflectors inside the belt.I have experienced that Those reflector get dusty or worn out and sensor can't check them and error occurs.

[mitsubee]

Open up your Transfer Ass'y Unit , Take out the Transfer Belt see if your Silver Marking Stickers behind the transfer belt missing or very dirty.Check the Silver marking censor inside the Tranfer Ass'y Unit..it will solved the problem.

Thanks