Toshiba EStudio 28

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • slloyd2
    • Jun 2025

    #1

    Toshiba EStudio 28

    Hello,

    I had th epower flicker a fwe times and now the estudio when i turn it on will only briefly light up and then it goes black. Is there a fuse or something?

    Thanks
    Shawn
  • Paper_path
    Technician

    50+ Posts
    • Jul 2009
    • 55

    #2
    Power Supply

    Turn off the copier and unplug it from the wall. After a minute plug it back in and start it up. This will reset the power supply, if it doesnt work after a few tries, your power supply may have been damaged.

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      And if that doesn't fix it, call a qualified technician.

      Paul@justmanuals.com

      Comment

      • mitsubee
        Trusted Tech
        • Jul 2007
        • 176

        #4
        izzit toshiba DP2800 or es280? for DP2800 it always have this problem...the power board is super sensitive...try to plug-into a supply which is NOT shared by too many device..

        Thank and hope this would help

        Comment

        Working...