Hey everyone,
I'm having a problem with an e-Studio 28 popping up with a C26 error practically every time the machine boots. I've pulled the glass and optics apart for cleaning, but it looks like the CCD is just shot. The one test copy I was able to get out was almost entirely black, aside from some white line patterns that were definitely digitally generated. Any internal test prints come out just fine.
However, I'm not sure how to go about getting a CCD - I've tried a few generic google searches without much luck, and checked with a few third-party vendors I normally use (work for a Konica Minolta/Panasonic/Samsung dealership) but none of them carry it (wouldn't imagine they would anyway). Any ideas? I've heard many of the Toshiba engines are shared with Sharp machines, but am not sure if this machine is one of those. If so, I have a buddy at a Sharp dealership I could probably get one through. Any support would be appreciated!
I'm having a problem with an e-Studio 28 popping up with a C26 error practically every time the machine boots. I've pulled the glass and optics apart for cleaning, but it looks like the CCD is just shot. The one test copy I was able to get out was almost entirely black, aside from some white line patterns that were definitely digitally generated. Any internal test prints come out just fine.
However, I'm not sure how to go about getting a CCD - I've tried a few generic google searches without much luck, and checked with a few third-party vendors I normally use (work for a Konica Minolta/Panasonic/Samsung dealership) but none of them carry it (wouldn't imagine they would anyway). Any ideas? I've heard many of the Toshiba engines are shared with Sharp machines, but am not sure if this machine is one of those. If so, I have a buddy at a Sharp dealership I could probably get one through. Any support would be appreciated!
Comment