estudio 452

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RSCA
    Trusted Tech

    100+ Posts
    • Jul 2008
    • 112

    #1

    estudio 452

    The machine was not in service for about 2 years. Was in an office networked with fax and scan options. Now moved into home office. Not connected to network or fax line. Machine starts up, fuser heats but says "wait". Also say "Network Initializing". No other errors present. Any ideas? Thanks.
  • ToshibaTech
    Senior Tech

    500+ Posts
    • Apr 2007
    • 580

    #2
    You can do 08-693 to reset the NIC, might get rid of the Network Initializing message. As to the wait, it could be the HDD you can try 08-690 (2) to format the HDD. You'll lose any stored phone number, templates, etc... but if it formats it will still fire up.
    I will not give you service manuals or firmware.

    Comment

    • fireater
      Repair God? not quite

      250+ Posts
      • Apr 2006
      • 253

      #3
      sounds like hdd
      I fix copiers ...Well Sorta

      Comment

      • RSCA
        Trusted Tech

        100+ Posts
        • Jul 2008
        • 112

        #4
        Formatting the hard drive created a system error "2". I can buy the hard drive from Hytec but need the system software. Can anyone get that for me? Thanks.

        Comment

        • fireater
          Repair God? not quite

          250+ Posts
          • Apr 2006
          • 253

          #5
          get a generic hdd from the computer store as for firmware pm me with a ftp i will send .... file is big so make lots of room
          I fix copiers ...Well Sorta

          Comment

          Working...