Toshiba e-studio 310c Copier

[Guest]

I have a toshiba e studio 310c copier and when I print from the computer it prints out two sheets of paper, the first one says

ERROR: Unknown curve: FAST.ICCGSSXX.Sim.Set OFFENDING COMMAND:
STACK:
1
and the last page come out blank

Can anyone tell me what this means and where is the sims located. It copies off the glass fine but through the fiery is where my problem is.

Thanks in advance

[bojans]

Try printing something else, i think that your file is corrupted.

[imyomel]

It does this with every file I print and from all of my computers.
Thanks

[Mr Spock]

I would delete and reinstall the driver. I would also look at possibly reloading the fiery os. Also make sure the driver and fiery versions match or you can receive this error.

[imyomel]

Thank you very much, I will try this

[imyomel]

Can anyone tell me where I can find the drivers for my e studio 310c.
Thanks

[emujo]

This is a post script, or PCL error. When the MFP can't interpret the file you are trying to print. This is a pretty old MFP and firmware/driver updates may not make a difference. There may be a update, or patch for the Fiery that may offer you a solution. EMujo

[ivovb]

Can anyone tell me where I can find the drivers for my e studio 310c.
Thanks

It is easy to find:

Drivers | Support | Toshiba Copiers

BR