toshiba estudio 452

[tweek65]

how do you turn off the (maintance light)?went thru the book couldnt find it,i am not a toshiba man?thanx

[rocky246]

Shutdown the machine. Hold down 0 and 8 buttons while you turn it on. Press 2, press 5, press 2, and then press start. The pm count will appear. Select 0 and press enter on the screen. This will reset counter. Power off and on.

[tweek65]

e studio 452

thank you!

[emujo]

Don't forget to use the PM support mode (6/Start) to reset the counts of the items you have replaced, not to big a deal for feed tires, but can cause problems if you have nice new clean corona wires but the MFP thinks there are 250K copies on them. Drum falls into this catagory also. Emujo