toshiba estudio 452

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tweek65

    #1

    toshiba estudio 452

    how do you turn off the (maintance light)?went thru the book couldnt find it,i am not a toshiba man?thanx
  • rocky246
    Technician

    50+ Posts
    • Feb 2007
    • 91

    #2
    Shutdown the machine. Hold down 0 and 8 buttons while you turn it on. Press 2, press 5, press 2, and then press start. The pm count will appear. Select 0 and press enter on the screen. This will reset counter. Power off and on.

    Comment

    • tweek65

      #3
      e studio 452

      thank you!

      Comment

      • emujo
        Field Supervisor

        2,500+ Posts
        • Jun 2009
        • 3009

        #4
        Don't forget to use the PM support mode (6/Start) to reset the counts of the items you have replaced, not to big a deal for feed tires, but can cause problems if you have nice new clean corona wires but the MFP thinks there are 250K copies on them. Drum falls into this catagory also. Emujo
        If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

        Comment

        Working...