Toshiba E232 jigsaw printout

[Guest]

Hi
I'm working on this model E232 having like a jigsaw printout during copyin and printing.
Looks like laser problem . Have change new laser in box but still same fault. Can anybody give me an idea about this issue. I'll get the pics scan later on.
thanks

[Azman]

pls help.

[bryand]

Wow sounds like the problem we just had on a 232. If you printed the counter page it was staggered. It was the LVPS that resolved this.

[Azman]

232 jigsaw image

I'll show you the image . LVPS is it power supply board?Thanks a lot I will try it.Thanks Bryand.

[bryand]

Yes thats exactly it. Replaced the low voltage power supply (beside laser unit).

[emujo]

Had this same issue caused by arcing T/S corona wire. Tech had done PM and got the charge wire and sep wire mixed up, allowing a little slack which in turn allowed the wire to get too close to the corona shell.