On the 203s or 203sd, is the DV just pour and play ? Or does this model require a dv set-up stir and value setting ?
Toshiba 203sd DV change ???
Collapse
X
-
here you go easy
3.1 Adjustment of Auto-Toner SensorWhen the developer material is replaced, adjust the auto-toner sensor in the following procedure.
<Procedure> (Adjustment Mode (05-200))
(1) Install the process unit into the equipment.Note:Do not install the toner cartridge.
(2) While pressing [0] and [5] simultaneously, turn the power ON.
The following message is displayed on a 7-segment LED.Fig. 3-1(3) Key in code [200] and press the [START] button.Fig. 3-3Note:Fig. 3-4(9) Turn the power OFF.[
(10) Install the toner cartridge.
-
@james: This is a sharp made machine not the 203L you are probably thinking of...
On a 203SD it's just "pour and play" as you stated. No adjustment it's hardwired.I will not give you service manuals or firmware.Comment
Comment